Tying up a pattern on the David Loom

  1. Home
  2. Knowledge Base
  3. Louet Loom Specific Questions
  4. David
  5. Tying up a pattern on the David Loom

As a relatively new weaver, who has just moved from a Louet Hand-Loom to a Louet David how would you tie-up the following draft for a twill.  Working from left to right in the tie-up box, I would put a tie-cord on 1 and 2, then 2 and 3, then 3 and 4, and finally 4 and 1.  Have I got it right or does it need to be reversed and if so to what?

The David is a sinking shed loom.  The Klik is a rising shed loom.  If your pattern is for a rising shed loom (and most of the new patterns are) then you will tie-up the empty boxes in the your tie-up box.  For instance,  12,23,34,14  would be tied up 34,14,12,23….it is the exact opposite for a sinking shed loom.  However, if you don’t do this there really won’t be a problem because your fabric will just be upside down.  Turn it over off the loom and voila…..it is perfect.

Was this article helpful?

Related Articles