I am presently doing a boundweave project and having trouble with the tieup. My loom is a jack loom (Artisat) and I am presently using standard tieup but when talking about sinking sheds, they should go down, mine don’t, they just stay in place. When I press 1-2 – they go up but the rest don’t move at all, is this considered a rising shed? Should this be threaded instead of standard, ie 1&2 should it be 3&4 and so on?
You have a rising shed loom. Really your pattern will still work perfectly, it will just be slightly shifted.
If you want to reverse it to work like a counter-balance, you just have to re-work the tie-up. But I wouldn’t bother …. your cloth will be exactly the way it should be on the bottom with the reverse on the top …….. that is the slight shift.
- On a CB loom 1&2 tie-up makes 1&2 go down and 3&4 go up
- So on a rising shed loom you just tie-up 3&4 which leaves 1&2 down
- On a CB loom 2&3 tie-up makes 2&3 go down and 1&4 go up
- So on a rising shed loom you just tie-up 1&4 which leaves 2&3 down
- On a CB loom 3&4 tie-up makes 3&4 go down and 1&2 go up
- So on a rising shed loom you just tie-up 1&2 which leaves 3&4 down
- On a CB loom 1&4 tie-up makes 1&4 go down and 2&3 go up
- So on a rising shed loom you just tie-up 2&3 which leaves 1&4 down
Hope this helps….