Is it possible to move the cloth beam (I hope that’s the correct term, or that you at least know what I mean) down to the stand, and leave the warp beam attached to the loom itself? Also, if the loom is on the stand, with one or both beams moved down to the stand, and the loom is warped, is it still foldable & portable. If so, to what extent?
Yes, you can move one beam down without moving the other beam. This will make it less portable. When either beam has been moved to the stand you cannot take the loom off of the stand so it folds and locks. The loom only locks when it is off of the stand. However, you can still move the Jane on the stand as it is not very heavy.