sofsthun

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: Shaft problem #196133
    sofsthun
    Participant

      So pleased with your Louet sheds.  Understood everything except “making sure the screws were parallel to the ground”. Do you use the same hole on the texsolv on all cords from lamms to treadle tie-up?  If so, which one do you use from the bottom of the cord?  I usually use the 2nd hole from the bottom.   They look good when the pin is in, but some are very loose when I start weaving.

      in reply to: Shaft problem #196060
      sofsthun
      Participant

        Im having the same problem with my Spring on the turned twill we re starting now.  I’ve been weaving on my Spring for two years now but when I get to 8 shafts in draft I have some shed issues also.  I’ve checked all the obvious, rechecked all three times, can’t find why 2-3 sheds aren’t opening properly.  I warp with pin in, all lams are level.  Proper texsolv cords on the lamms.  What hole from end of cords do you hook onto screw?  I use second hole from end.  When I take the pin out and start weaving, I have some that are really loose, is this right?  All shafts have been checked for problems on wheels and shaft ends

        in reply to: Thoughts on 5.1.1 – Introduction to Season 5 #193663
        sofsthun
        Participant

          Be patient, its worth the wait.

           

          sofsthun
          Participant

            Ive had my Fiberworks program for sometime but never have really taken the time to read all the words..lol. I thank you so much for this episode and a “show me” that makes the understanding of the program so much easier for me.  I will start using it again.

            in reply to: Season 3: Episode 6 – Simple Collapse Weave #93893
            sofsthun
            Participant

              8C59E77F-C19F-4661-8B5A-0818FA1512F6

              sofsthun
              Participant

                D0A248D5-93BC-4438-ACF8-7B19E1BCB827

                in reply to: Heddles #46017
                sofsthun
                Participant

                  I bought metal heddles from Leclerc looms that can be inserted when you need a missed heddle.  They work great.

                  in reply to: Look where we all live & Introductions #43765
                  sofsthun
                  Participant

                    Greetings from Kennewick, Washington.

                    sofsthun
                    Participant

                      My first set of towels  Sharon O.  Thanks Jane really enjoying the class

                       

                       

                        <li style=”text-align: right;”>CE795CC5-9847-4238-A7BC-CF8F5FAFE97F
                    Viewing 9 posts - 1 through 9 (of 9 total)