fudsy1

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 57 total)
  • Author
    Posts
  • in reply to: Season 4 Twills #147455
    fudsy1
    Participant

      I’ve been looking around for the start date of Season 4  can someone say please

      in reply to: David2 looking for Tips and Tricks #137528
      fudsy1
      Participant

        I thought it was just me.  I’m loving my new loom but he didn’t come with any instructions other then assembly

        in reply to: David2 looking for Tips and Tricks #136505
        fudsy1
        Participant

          On hard fast lesson, always keep extra heddles on the edges of the harness since they actually serve as part of the harness system and will collapse if you move them all away from the edge

           

          509D0F28-0945-4BEB-B36F-4250C0431E06

          in reply to: Season 4 supply list #136003
          fudsy1
          Participant

            Thank you 🙂

            in reply to: Louet David Loom #115547
            fudsy1
            Participant

              I ready every post here and over on the 8-shaft FB group.  I’ve been studying the David for over a year now and two weeks ago pulled the trigger and purchased the 35″.  I’m so looking forward to him arriving. My email says he should ship the end of November.  Until then I will keep plugging away on my Jane tableloom

              in reply to: Season 3: Episode 1 – Denting #110873
              fudsy1
              Participant

                I absolutely over your choice of colors!

                in reply to: Season 3: Episode 7: Double Width, Double Layers #100695
                fudsy1
                Participant

                  I posted in another location but will ask here too. I’m using a Jane table loom and everything works perfect for a double weave right up until the project comes across the cloth beam and it reaches the take up roller soon as that happens I completely loose tension on the bottom half so I struggled only for a few more rows and have to give up. I tried it twice and with exact same results.  any ideas?   once wet finished it looks fine but very disturbing  about the sloppyness of the bottom halfdouble weave

                  in reply to: Thoughts on 3.7.2 – Weaving Double Width at the Loom #155969
                  fudsy1
                  Participant

                    This season I’m weaving on a Jane Table loom. I’m having an issue with my bottom layer. the tension is even, everything is great and start weaving.. soon as the weaving goes across the cloth beam I loose bottom layer tension and suddenly it moves forward of the top layer. I’m not sure if it’s because I’m using a table loom ? I’ve been using my Jane for all the projects to date with no issues, this is the first time. I cut the small sample off, tied up again to make the shawl and the same issue, soon as the weaving came across the cloth beam I lost tension on the bottom half . after wet finishing everything appeared to be fine so I’m slightly confused

                    in reply to: Thoughts on 3.7.2 – Weaving Double Width at the Loom #155964
                    fudsy1
                    Participant

                      when a person is done with the project do you end on the top/ 1st -shaft 1?

                      fudsy1
                      Participant

                        What notes? You mentioned making our note clear..
                        Loved this episode like all the past ones, you really are a great teacher

                        in reply to: Thoughts on 2.7.1 – Stripes at the Table #156459
                        fudsy1
                        Participant

                          Yes it does! Thank you so much. I though it should but my OCD -matchy,matchy. Was getting the better of me. Did I miss this explanation in season 1 ? Just for future reference

                          in reply to: Thoughts on 2.7.1 – Stripes at the Table #156457
                          fudsy1
                          Participant

                            I’m stuck for some reason. If the outside threads are 108 then that is 27 groups of 4. threaded 1,2,3,4 but the middle is 114 threads- it can’t be threaded 1,2,3,4 and come out even. my full warp end on will not end in a group of four, what am I missing. I’ve been struggling and counting and recounting all day.

                            114 divided by 4 (1,2,3,4) is 28 with a remainder of 2…
                            does any of this make sense ?

                            in reply to: Thoughts on 3.2.1 – Introduction to Cramming & Denting #156171
                            fudsy1
                            Participant

                              Ellore.28,
                              how did this work for you? I also own a Jane loom and just love it. I’m playing catch up from last year while trying to do this season. The denting was loads of fun

                              in reply to: Inspired by Jane #64908
                              fudsy1
                              Participant

                                Oh my gosh! You are an inspiration to me.  so lovely

                                in reply to: Season 3: Episode 1 – Denting #63522
                                fudsy1
                                Participant

                                  MQX  – I love your colors and looking forward to the finished pieces

                                Viewing 15 posts - 16 through 30 (of 57 total)