Forum Replies Created
-
Posts
-
Hi Liz, what Sandra said,I measured the length I needed 28″ went to the local hardware store and purchased a rod with the BLUE colored dot on the end. I asked if they could cut it to 28″ which the were kind enough to do with their pipe cutter. My husband ground the rough edges smooth and I wiped the rod down with warm soapy water. I hope this helps
the Pattern calls for a 12 dent reed w/ 3 per dent but in the demo looks like Jane is using a 6 dent reed? so would that be 6 threads per dent and hemstitching 12 threads? I know it’s all personal choice but just wondering
If you go to her FB page she just finished an 8 shaft warp doing this in the last few towels I’m fairly sure
Thank you both for the great photos. I just took my latest project off the loom yesterday but plan on dressing the JST season 4 Lesson 3 twill gamp tomorrow and will look closely at where my warp threads sit. and take a photos to add to this thread. I’ve been having problems with missing the floating selvage
I own a New David too, and this whole thread is very interesting so could I please impose on you to add new photos of what you changed to have the threads flat on the race now. P-l-e-a-s-e I’d so grateful
that is also the way I do it on my table loom but just wanted to confirm. I really do love how that outside the basic laws of weaving the “rules” are pretty flexible
I have finished all the 2/2 twill samples and am ready to start the 3/1 & 1/3 samples on my David, the question I have is as I’m watching Jane weave the first set of stripes @ 55 minutes in it appears she is going over the float selvage during the 1/2/3 – 2/3/4 – etc set. Is this correct or does it matter??
